LEVEL Mach 1.3
Max power (mW)
Maximum Working Frequency (Hz)
The ultrasonic Mach 1.3 is a medical device consisting of a generator and its handpieces that make up the ultrasonic emission heads.
The Mach 1.3 is equipped with the two main emission frequencies, 1MHz and 3MHz, with continuous or modulated output from 25 to 100hz, all managed by a single output. The electronics automatically recognizes the Handpiece installed by the user and in the case of the dual frequency head you can select via software the frequency you want.
The generator consists of a non-propagating fire-fighting ABS plastic casing made of ignition technology. Inside it contains the hardware support for the operation, both the part dedicated to the power and the logic. The iteration between the operator and the device is done via a large graphic display 3.5 “with touch-screen interface. This allows the operator to read directly in the monitor all the useful information and the controls are imparted directly in the monitor by pressing with the fingers the affected area, type the time of therapy, the mode of emission, start the therapy and set the power of delivery.
The electronics are made of three subsystems:
- Power supply: N. 1 internal stabilized power supply.
- Control: N. 1 CPU card, N. 1 display/TS..
- Power: N. 1 power card generating output.
For reliability, the device does not require continuity of service.
Handpiece 5cm²: 1 o 3 MHz
Working area: 5 cm2
Working Frequency: 1 o 3MHz, choosen by the user.
Maximum Power: pari 10 Watt.
Recognition Resistance: 220KOhm (1%)
Connecting Cable: L. 2,20mt – tipo RG58